Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 45 / 174

AquaTrans™ AT600 User’s manual 35
Chapter 4. Initial setup and programming
4.4.1 Display format
To begin programming your meter, you must select the system units as discussed below. Remember to record all
programming data in Appendix B, Data records. The display format submenu is used to set up the type of format to
be used in displaying information.
4.4.2 Keypad lockout
Note:
When the keypad is locked, press [x], [√], [x] to unlock it.
On the initial screen, use the arrow keys
to highlight the lock symbol and press [√].
The following screen opens.
Use the [

] or [

] keys to highlight
display format and press [√]. The
following screen opens.
Use the [

] and [

] arrow keys to
highlight the desired format setup and
press [√] to return to the previous screen.
To lock or unlock the keypad for security, on the
display menu, select Keypad lockout and press [√]. A
screen similar to the following opens.
To lock the display, use the [

] and [

] keys to
highlight yes and press [√]. The screen returns to the
previous display.
To unlock the display, use the [

] and [

] keys to
highlight no and press [√]. The screen returns to the
previous display.