Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 13 / 174

AquaTrans™ AT600 User’s manual 3
Chapter 1. General installation instructions
1.3 Safety guidelines
To ensure safe and reliable operation of the AT600, the system must be installed in accordance with the guidelines
discussed in this manual. This chapter includes the following topics:
• dasda
• “Unpacking the AT600 system” on page 4
• “Installing the electronics enclosure” on page 5
• “Choosing a clamp-on fixture/transducer location” on page 7
• “Mounting the clamp-on fixture and transducer system” on page 8
WARNING!
The AT 600 flow transmitter can measure the flow rate of many fluids, some of which are
potentially hazardous. The importance of proper safety practices cannot be
overemphasized.
WARNING!
Be sure to follow all applicable local safety codes and regulations for installing electrical
equipment and working with hazardous fluids or flow conditions. Consult company
safety personnel or local safety authorities to verify the safety of any procedure or
practice.
Attention European Customers! To meet CE marking and UL marking requirements, all cables must be
installed as described in “Wiring cable specifications and requirements” on page 144