© 2018 Baker Hughes, a GE company, LLC. All rights reserved.
Masoneilan SVI II ESD Quick Start Guide
=
|
57
Accessing Pushbuttons
The local pushbuttons are located behind a hinged cover, directly below the display window. To
open the cover loosen the screw and swing the cover down. Always re-fasten the cover after use
to protect the pushbuttons from environmental contamination.
The three pushbuttons perform the following functions:
Left Button
- Marked
*
,
permits you to
select
or
accept
the value or
parameter option currently displayed.
Middle Button
- Marked
–
,
permits you to move back through the menu
structure to the previous item in the menu or decrement the value currently
shown in the digital display. When used to decrease a displayed value,
holding the button down causes the value to decrease at a faster rate.
Right Button
- Marked
+
,
permits you to move forward through the menu
structure to the next item in the menu, or to increment the value currently
shown in the digital display. When used to increase a displayed value,
holding this button down causes the value to increase at a faster rate.
NOTE
When an exclamation point (!) appears in the SVI II ESD display
window, it indicates instrument status available.
Figure 19 SVI II ESD Display Pushbuttons
*
+
-
(Select)
(Forward)
(Back)
