Copyright 2013 Baker Hughes Company.
74 | DPI
620G Instruction Manual–English
Chapter
8.
Documenting
8.1.2 Define Reference Channel
1. Tap the channel button that is to be used as the Reference channel for the analysis.
Figure
8
-
1: Select Reference Channel
2. Set the required channel type to Reference.
3. All other channel settings for this Reference channel will no longer be available. All other
active channels are automatically set as Input channel(s).
8.1.3 Define Input Channel(s)
Tap each Input channel button to set the Input options.
Figure
8
-
2: Select Input Options
•
SCALING
The scaling values are four set values:
a. The maximum and minimum Reference signal values (Reference High and Reference
Low).
b. The Input signal values (Input High and Input Low).
