Baker Hughes Druck DPI 620 Genii, Instruction Manual

Page: 57 / 166

Copyright 2013 Baker Hughes Company.
English–DPI 620G Instruction Manual | 45
Measure or Simulate a Resistance Temperature Detector (RTD)
c. Sine
• AMPLITUDE - Select the Peak-to-Peak value.
• OFFSET - Set an offset value (only applies when Sine and Triangle waveforms are
selected).
4.9 Measure or Simulate a Resistance Temperature Detector (RTD)
Figure 4 - 12, Figure 4 - 13 and Figure 4 - 14 show CH1 set up to measure an RTD. A 4 - wire
configuration gives the best accuracy; a 2 - wire configuration has the lowest accuracy.
Figure 4 - 12: PT100 RTD Measure CH1 4-Wire (Range - 200 to 850°C)
Figure 4 - 13: PT100 RTD Measure CH1 3-Wire (Range - 200 to 850°C)