Copyright 2013 Baker Hughes Company.
English–DPI
620G Instruction Manual | 43
Measure Frequency on CH1
Figure
4
-
8: Measure Current on CH2 with Internal Loop Power (Range: 55
mA)
4.7 Measure Frequency on CH1
Figure
4
-
9: Example A – Measure Frequency on CH1 (Range 0 to 50
kHz)
1. Set applicable channel options: CH1, Source, Frequency, Hz (or other unit).
2. Complete the electrical connections.
3. Default channel settings:
•
Range: 0 to 50
kHz
•
Trigger level: 2.5
V
If necessary, adjust the Trigger level value by pressing the SETTINGS
icon and
selecting MANUAL LEVEL.
4. AUTO TRIGGER can be enabled or disabled.
Note:
Manual Level setting is for Manual Trigger only.