Baker Hughes Druck DPI 620 Genii, Instruction Manual

Page: 53 / 166

Copyright 2013 Baker Hughes Company.
English–DPI 620G Instruction Manual | 41
Measure AC Voltage (CH1) – 300 V RMS Maximum
2. Complete the electrical connections and continue with the measure operation.
4.4 Measure AC Voltage (CH1) – 300 V RMS Maximum
Figure 4 - 4 shows CH1 set-up to measure an AC voltage with the AC probe Maximum:
300 V RMS.
Figure 4 - 4: Measure AC Volts with AC Probe (Range 300 V RMS)
1. Set the applicable channel option for the AC Probe.
2. Complete the electrical connections Red - V/Hz connector, Black - COM connector. Then
continue with the measure operation.
4.5 Source DC Voltage (CH1)
Figure 4 - 5 shows CH1 set up to source a DC voltage on CH1 (0 to 20V).
Figure 4 - 5: Source Voltage on CH1 (Range 0 to 20 V)
WARNING
To prevent electrical shocks, use only the Druck specified AC
probe (Part: IO620 - AC) to measure AC voltages that are more than 20 V RMS
(maximum: 300 V RMS). Attach it to the specified connections only.