Copyright 2013 Baker Hughes Company.
English–DPI
620G Instruction Manual | 39
Measure or Source Current
4. Electrical Tasks
The DPI
620 Genii provides the following electrical functions:
•
Current (measure & source)
•
Voltage (measure & source)
•
Thermocouple (measure & simulate)
•
Frequency (measure & source)
•
Resistance (measure & simulate)
•
RTD (measure & simulate)
•
Pulses (measure & source)
•
Observed (source) - allows a value to be manually entered e.g. the reading of a connected
voltmeter.
4.1 Measure or Source Current
1 shows CH1 set up to measure a current with external loop power.
Figure
4
-
1: Measure Current on CH1 (Range ±
55
mA)
1. Set the applicable channel options: CH1 (or CH2), Measure (or Source), Current, mA.
2. Complete the electrical connections as shown and continue with the measure or source
operation.
