Baker Hughes Druck DPI 620 Genii, Instruction Manual

Page: 45 / 166

Copyright 2013 Baker Hughes Company.
English–DPI 620G Instruction Manual | 33
Task Menu
3.3.5 Custom Task
1. Select CUSTOM TASK from the Task Menu.
This allows the user to individually set up CH1 and CH2 in addition to the Pressure Channels
P1 and P2, USB (IDOS or TERPS) and Communications (HART®, FOUNDATION™
Fieldbus or Profibus®).
Figure 3 - 9: Task Settings Menu
Table 3 - 1: Calibrator Channel Description
Channel Description
CH1 Set up CH1 by entering the channel settings menu.
CH2 Set up CH2 by entering the channel settings menu.
P1 is used for pressure measurements with pressure module connected on
position P1 on the pressure module carrier. Refer to Section 5.
P2 is used for pressure measurements with pressure module connected on
position P2 on the pressure module carrier. Refer to Section 5.
Used for external sensors i.e. IDOS, TERPS or RTD - Interface. Refer to
Section 5 and Section 6.
Used for HART®, FOUNDATION™ Fieldbus and Profibus® PA. Refer to
Section 9, Section 10 and Section 11.
P1
P2