Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | 7
Fitting Batteries
2. Getting Started
2.1 Fitting Batteries
2.2 Switching On
Press the
I/O
switch on the front panel and proceed as follows:
The first time that the instrument is powered up, it will power-up in
BASIC
mode with the main
screen displaying voltage in the input display area and pressure in the source display area. To
switch to
Current
as input, press
F1
as shown. Similarly,
F1
to return to
Voltage
.
Note:
No other keys are active in this mode and the instrument can only be reconfigured by
pressing the
TASK
key and selecting another mode.
1
Cover fixing screws.
2
Six alkaline C cells, see table. Only use the battery type in the table.
3
Low battery indication.
WARNING
Batteries must only be fitted in a safe area.
Use only the batteries specified in “Batteries” on page
ii.
CAUTION
Old batteries can leak and cause corrosion. Never leave discharged
batteries in the instrument. Old batteries should be treated as hazardous waste
and disposed of accordingly.
PRESSURE INT
VOLTAGE
CURRENT
PRESSURE
UNITS
TASK : BASIC
+
-
2
1
Summary of Contents for Druck DPI 610 IS
