Baker Hughes DigitalFlow XGF868i, Programming Manual

Page: 45 / 100

Chapter 4. Printing data
4.1 Data types for printing
The XGF868i flowmeter has no ability to print any of its
data directly. However, any of the data stored in its memory
may be printed via the built-in RS232 communications port,
using a computer terminal. In order to use the capability,
the XGF868i must be linked to the computer terminal
with the optional PanaView software.
NOTE: See Chapter 1, Installation , of the Startup guide for
instructions on wiring the RS232 serial port. For additional
information, refer to the EIA-RS Serial communications
manual (916-054).
After making the hardware connections and installing
PanaView software, the following data may be output to a
printer connected to the personal computer:
• Live data in numeric or graphical format
• Log file in numeric or graphical format
• Site file in tabular format
• Transducer signal array data in tabular format
For detailed instructions on printing any of the data types
listed above, consult the PanaView User’s manual .
35