72 | Baker Hughes
© 2022 Baker Hughes Company. All rights reserved.
Cycles 1,875
Control ❚ ❚ ❚
Feedback ❚ ❚ ❚
Deadband 1.5% ♦ N
CTRL = Using Digital Inputs
MAN = Under Manual Control
PGM = Under Program Control
Variable length bar indicating current
between 4-20 mA
Example:
= 4 mA
❚ ❚ ❚
= 12 mA
❚ ❚ ❚ ❚ ❚ = 20 mA
A = Automatic, Analog
a = Automatic, Digital
M = Manual, Analog
m = Manual
P = Program Control
S = Standby
- = Idle
d = Decreasing Current
D = Decreasing Current, Bypass Limit
i = Increasing Current
I = Increasing Current, Bypass Limit
H = Halted
W = Waking (Solenoids on, Not Yet Moving
M = Moving
C = Coasting
= Full Range, Standard
= Split Range, Standard
= Full Range, Learned
♦ = Split Range, Learned
Digital Mode
As opposed to the Current Loop Mode, the DNGP also has Digital Mode. In navigating the Run-Time
screen the only noticeable difference is the display of the
Top Variable Feedback Bar.
In this case there is no bar, only the current active input appears. All button commands have the
same function as in Current Loop Mode.
