BAK Thermoplastic Welding Technology AG
6
6. Welding temperature adjustment
6.a Welding temperature adjustment
6.b Reduce temperature
6.c Increase temperature
7. Hot air system
8. Guide roller
9. Carrying handle
10. Weight (optional additional weight)
11. Lifting device
12. Pressure roller
BASIC ADJUSTMENTS WELDING MACHINE TAPE/VANDALISM PROTECTION
Perform adjustments only in cold condition (Danger of burns!).
Nozzle adjustment
Loosen the screws on the bracket to change adjustments on the nozzle.
See below drawings for the recommended adjustments.
Adjust nozzle distance with 2 screws (C) to the pressure roller and to lower (D) and upper (E)
stop Eron.
Distance between C Distance between
nozzle tip and middle E bottom line of nozzle
of pressure roller tip and ground
37-42mm D 2-7mm
Guide roller adjustment
Welding machine band/vandalism protection
Distance at
Band width
12mm
40mm
12mm
50mm
