BAK BAKFlip G2 Installation Sheet Download Page 6

Page: 6 / 6

Warranty

BAK® Industries (“BAK”) warrants your BAKFlip Hard Folding Cover to be structurally free from defects in material and
workmanship for the period as outlined in the table below from the retail date of purchase. Warranty registration must
be on ﬁle and/or proof of original purchase (detailed and dated receipt) required for warranty service. Warranty is non-
transferable and applies to the original purchaser of the BAK product only.

BAK reserves the right to determine whether a product needs to be repaired or replaced. No labor or service allowance
is given or implied. The warranty will be void if the product has been damaged by accident, unreasonable use, neglect,
improper service/installation/removal, modiﬁcations, acts of God or normal wear and tear or other causes not arising out
of defective materials or workmanship. BAK assumes no liability for injury, loss, incidental or consequential damages.
BAK reserves the right to substitute an entire replacement system or provide other remedies than those listed in this
warranty for discontinued products or other reasons. Shipping charges will apply for any repair or replacement.

BAK is committed to providing you with our best service at all times. Please feel free to contact us should you require any
assistance with your BAK product.

CARE AND MAINTENANCE

BAK Flip tonneaus are made from durable materials and require simple care to ensure a long life of performing well and
looking great.

Cleaning the Top (Washing)

Standard automotive soap and water with a soft sponge or cloth is recommended for cleaning. Shammy dry to keep
the ﬁnish polished and brilliant. Wax is NOT recommended as it tends to ﬁll in cracks and crevices, which may aﬀect the
textured panel ﬁnish. Do NOT use any harsh cleaners or abrasives.

Treating the Vinyl Top

3M 303 Aerospace Protectant may be used to keep the vinyl surface clean and protected from the elements and will also
remove any water spots that may have developed. 303 Aerospace not only protects against fading, discoloration and
cracking from harmful UV rays, but repels dust and stains. Simply spray on and wipe dry for a beautiful, matte ﬁnish that
protects your cover from road grime and dust.

Maintenance

It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and
front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment
during operation. Covers that are used with high frequency or that are subject to the vibrations and impact from rough
roadways can cause the cover to require adjustment.

Lubricating the Latches

It is recommended that you periodically inspect and service the latches on each panel. Clean away any excess dirt or
grime and lubricate with silicone spray. Ensure the latches move freely in and out to properly engage the side rail and
provide proper performance with optimum security. Be careful not to overspray the cover. Wipe away any excess around

PRODUCT

WARRANTY PERIOD

BAKFlip G2

3 Year Limited Warranty

BAKFlip MX4

5 Year Limited Warranty

BAKFlip FiberMax

3 Year Limited Warranty

BAKFlip F1

5 Year Limited Warranty

REGISTER Y

OUR