Bajaj pulsar DTS-i, Service Station Manual

Page: 13 / 253

GENERAL INFORMATION
Pulsar 150/180 DTS-i
Service Station Manual
9
Dealer Development Center
Akurdi Pune
Storage of Removed Parts
After all the parts including subassembly parts have been cleaned,
store the parts in a clean area. Put a clean cloth or plastic sheet over
the parts to protect from any foreign materials that may collect before
reassembly.
Assembly Order
In most cases assembly order is the reverse of disassembly, however,
if assembly order is provided in this Service Manual, follow the
procedures given.
Replacement Parts
Replacement parts must be BAJAJ genuine or recommended by
BAJAJ. Gaskets, O-rings, Oil seals, Grease seals, Circlips or Cotter pins
must be replaced with new ones whenever disassembled.
Inspection
Reuse of worn or damaged parts may lead to serious accident.
Visually inspect removed parts for corrosion, discoloration, or other
damage. Refer to the appropriate sections of this manual for service
limits on individual parts. Replace the parts if any damage has been
found or if the part is beyond its service limit.
Visual Inspection of Removed Parts