manualshive.com logo in svg

Baja motorsports Extreme 150, Owner'S Manual, Page: 45 / 73

Share
Download
Baja motorsports Extreme 150 Owner'S Manual Download Page 45

39

Battery Replacement:
·  Remove old battery. Mark which cable is connected to the positive terminal (+) and 

which cable is connected to the negative (-) terminal.

·  Clean cable connectors with wire brush or sandpaper to remove oxidation.
·  After charging, install new battery. Put dielectric grease on the battery terminals to 

avoid corrosion. Connect cables to the proper terminals. Positive cable to positive 
terminal Å and negative cable to negative terminal y.

·  Positive (+) cable is red and larger in diameter. Negative y cable is black and smaller 

of the two in diameter. CONNECT NEGATIVE CABLE LAST.

·  Torque terminal bolts to 40 in. / lbs.
·  Place rubber pad in bottom of battery tray.
·  Securely fasten battery to the vehicle using cover and strap.

 

WARNING

·  DO NOT open sealed caps to add water to battery.
·  Always wear safety glasses and charge in a ventilated area.
·  If battery gets hot to the touch, discontinue charging and allow battery to  

cool down.

·  Do not use fast charging unless it is an emergency.
·  At the beginning or end of charging, turn off the charger first, in order to 

prevent electric spark and explosion.

·  Charge in a well ventilated area.
·  DO NOT smoke around batteries and keep away from open flame.

 

WARNING

·  To avoid possibility of explosion, always connect battery cable in the order 

specified: RED first; BLACK last. An exploding battery can cause serious 
injury or death.

·  Batteries contain sulfuric acid.
·  Always shield eyes with protective eyewear when working around battery acid.
·  Battery acid is poisonous and can cause severe burns.
·  DO NOT smoke around batteries and keep away from open flame.

Summary of Contents for Extreme 150










































































Reviews:

No comments