manualshive.com logo in svg

Baja motorsports Extreme 150, Owner'S Manual, Page: 27 / 73

Share
Download
Baja motorsports Extreme 150 Owner'S Manual Download Page 27

21

 

WARNING

Braking while turning the ATV could be hazardous.

Use of the brake when turning could cause the ATV to slide or roll over.

Use the brake to slow down before you begin to turn.

BRAKING

 

WARNING

Braking hard on slippery surfaces could be hazardous.

The ATV could skid and go out of control if you brake too hard.

Apply the brakes lightly and carefully on slippery surfaces.

 

WARNING

Operating the parking brake when the ATV is moving could be hazardous.

The front wheels could lock, and it will cause a skid and an accident.

Use the parking brake only after you stop the ATV.

 

WARNING

Braking suddenly without disengaging the engine using the clutch can cause the 
engine to stop suddenly and the rear wheels to lock.

Use the clutch with the brake.

To stop the ATV, first release 
the throttle lever and pull in 
the clutch.  

Then smoothly apply the rear and front brakes.

Summary of Contents for Extreme 150










































































Reviews:

No comments