OPERATING PROCEDURES
OPERATIONAL FUNCTIONS
4 - 18
WBPEEEUI110501A0
COPY STC CONFIGS TO STT03E TERMINAL
The following procedure explains how to copy configurations from the STC
cartridge to the STT03E terminal.
ERASE CONFIGURATION FROM STC CARTRIDGE
The following procedure explains how to erase configurations from the STC
cartridge.
Rerange Key
The following procedure allows the user to set the lower and upper range
values and change the engineering units of the field device to suit a particu-
lar application. If the user is interfacing a PTS pressure or EQS temperature
Key
Display
Comments
Select
FROM CARTRIDGE
.
Select
COPY ONE
.
The asterisk on the top line of the screen indicates copying
from the cartridge to STT
03
E terminal.
NOTE:
For details on the screen flow of
OVERWRITE
ALL
selection, refer to
Select a configuration using the up and down arrow keys.
For this example
CONFIG-1
is the chosen configuration.
The asterisk on the top line of the screen indicates copying
from the cartridge to
STT03E
terminal.
To copy the chosen configuration to the STC cartridge,
select OK.
F1
COPY CONFIGS
TO CARTRIDGE
→
FROM CARTRIDGE
ERASE 1 CONFIG
ENTER
COPY CONFIGS
→
COPY ONE
OVERWRITE ALL
ENTER
STT03 CONFIG *
[CONFIG-1 ]
CONFIG-?
CONFIG-75
ENTER
COPY FROM CART
CONFIG-1
→
O.K.
CANCEL
ENTER
CONFIG
"CONFIG-1 "
COPIED TO
HANDHELD RAM
CONFIG-1
READY
