OPERATING PROCEDURES
OPERATIONAL FUNCTIONS
WBPEEEUI110501A0
4 - 11
OPERATIONAL FUNCTIONS
The operational functions of the STT03E terminal apply to all transmitter
types. The following functions are covered in this section:
•
Special feature key functions.
•
Output key functions.
•
Status key functions.
•
F1 key (copying configurations to and from STC cartridges).
•
Rerange.
NOTE:
A series of
n
s in the display portion of the function procedures
indicate that an alphanumeric character can be displayed or entered in that
position.
Special Feature Key
The special feature key has different functions for each transmitter. Refer-
ence the specific product instruction for special feature information. An
example of the PTS transmitter is explained in this section.
allows the user to perform the following functions:
•
Fix output and cancel fix output.
•
LCD setup.
•
Standard configuration.
FIX OUTPUT/CANCEL FIX OUTPUT PROCEDURE
The fix output function allows the user to set the output to a percentage of
output, where the output of the field device does not change until cancel fix
output is performed. The following procedure steps through the fix and can-
cel fix output procedure.
SPECIAL FEATURE
Key
Display
Comments
Select
FIX OUTPUT
.
If
CANCEL FIX OUTPUT
is selected, press
and
the
READY
screen appears.
Use the number key pad to input the desired fix output
value.
SPECIAL
FEATURE
→
FIX OUTPUT
CANCEL FIX OUT.
LCD SETUP
STANDARD CONFG
ENTER
ENTER
FIX OUTPUT TO:
nnn.nn%
