Bailey Infi 90 NIAC04, Instruction

Page: 11 / 23

INTRODUCTION
INSTRUCTION CONTENT
I-E96-421A 1 - 3
INSTRUCTION CONTENT
This manual has five sections and an appendix.
Introduction Is an overview of the features, description and specifications
and a description of the NIAC04 module.
Installation Describes cautions to observe when handling the calibration
module. It shows the steps required to install the module and
connect cables.
Maintenance Provides a maintenance schedule.
Repair/Replacement
Procedures
Details how to replace an NIAC04 module.
Support Services Describes the support services (repair parts, training, docu-
mentation, etc.) available from Bailey Controls Company.
Appendix A Provides a quick reference of dipswitch settings for the
IMASM04 Analog Slave Module.
HOW TO USE THIS MANUAL
Read this manual before handling the calibration module.
Refer to the sections in this list as needed for more informa-
tion.
1. Read the Section 2 before connecting the NIAC04 module.
2. Refer to Appendix A for the IMASM04 slave module.
3. Refer to the Section 3 for the maintenance schedule.
4. Refer to the Section 4 and Section 5 when needed.
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-1 contains the glossary of terms for this manual.
REFERENCE DOCUMENTS
Table 1-2 contains the reference documents for the NIAC04
module.
NOMENCLATURE
Table 1-3 contains the modules and equipment that can be
used with the NIAC04 module.