OVERVIEW
I-E96-192-5A
1 - 1
SECTION 1 - INTRODUCTION
OVERVIEW
The IIOIC42 Operator Interface Console (auxiliary console) is a
remote monitor and keyboard interface that connects to a
main console, either a IIOIS41 or IIOIS42 Operator Interface
Station (G.3 or later software). The main console connects to
the Plant Loop
®
or INFI-NET
®
communication highway.
In this document, auxiliary terminal refers to an IIOIC42 con-
sole (Figures
through
). Read all of this instruction to
get the greatest benefit of the information it contains. Read
each procedure before doing the task. Call the local Elsag
Bailey sales office for technical assistance.
This section contains an overview of the auxiliary console. This
document contains directions and cautions for installing and
servicing the operator interface console (OIC).
INTENDED USER
System engineers and technicians with a background in pro-
cess control systems should read this instruction thoroughly
before installing and using the system.
Do not
put the console
into operation until you read and thoroughly understand this
instruction. This instruction is a reference for installers with
installation and maintenance experience on process control
equipment. It is not a tutorial.
OIC DESCRIPTION
The operator interface console is an auxiliary console for the
main console (OIS). It provides a remote operator interface for
displaying graphics, alarm summaries, INFI 90
®
OPEN status
and for logging, trending and process control. The auxiliary
console allows more than one operator to use a single main
console. The four models of OIC42 operator consoles are
19-inch tabletop (IIOIC421), console (IIOIC422 which has two
variations), environmental cabinet (IIOIC423), and 19-inch
panel mount model (IIOIC424). The variations of the console
model (IIOIC422) can have an upper monitor (IIOIC4222) or
lower monitor (IIOIC4221).
An Ethernet network cable connects the OIC auxiliary console
to a OIS main console. Refer to
and
for more
hardware information. Four models of the OIC are shown in
Figures
and
. Table
lists the models.
®
Registered trademark of Elsag Bailey Process Automation.
