Baileigh R-M10E, Operator'S Manual, Page: 24 / 36

22
22
OPERATION
START – UP INSTRUCTIONS
1. Select the proper rolls for material being
formed.
2. MAKE SURE area around rolls is free from
any obstructions.
3. Turn the On/Off switch (A) to the ON
position. The white lamp (B) will come on.
4. Press the green start button (C) to activate
the foot pedals.
5. Step on the left foot pedal (D) and confirm
that the bottom rolls rotate to the left,
counter clockwise (ccw). This will cause the
material to move to the left when loaded.
6. Step on the right foot pedal (E) and confirm
that the bottom rolls rotate to the right,
clockwise (cw). This will cause the material
to move to the right when loaded.
7. With either foot pedal depressed, press
either EMERGENCY STOP switch (F) to
stop the rolls from turning.
8. Twist the emergency stop button clockwise
(cw) to reset.
9. Follow the next operation instructions to
load and bend material.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
When handling large heavy material, make sure they are properly supported.
A
B C F
D E
F