Baileigh IP-208, Operator'S Manual

Page: 30 / 44

28
28
Parts Lubrication Required
No. Position Grease Oil
1 Worm Gear Yes No
2 Gear Box No Yes
3 Chain Yes No
4 Chain Yes No
5 Chain Yes No
6 Bracket No Yes
7 Lead Screw Yes No
8 Column Clean & Oil No Yes

Worm Gear is used to adjust the table up or
down. (Fig. 29)

The oil in Gear Box must be changed after 2500
hours of work. (Fig. 30)

All chains must be lubricated regularly. (Fig. 31)

After 30 hours or more of work the lubrication of
bracket must be changed. (Fig. 32)

The machine comes equipped with four head
screws, it is important to always keep them
lubricated. (Fig. 33)

To ensure maximum performance always keep
the sliding rolls of table lubricated (Fig. 34).
Fig. 29
Fig. 30
Fig. 31