Baileigh Industrial WL-1847VS, Operator'S Manual

Page: 12 / 36

10
10
TECHNICAL SPECIFICATIONS
Over Bed
18” (460mm)
Swing Over Tool Rest Base
14” (356mm)
Distance Between Centers
47” (1200mm)
Speeds (RPM) 0
– 1200 & 0 – 3200
Spindle Nose 1-
1/4” x 8 TPI (M33 x 3.5)
Drive Spindle Through Hole 3
/8” (10mm)
Tailstock Spindle Through Hole
3/8” (10mm)
Tailstock Spindle Travel
4” (110mm)
Tool Rest
14” (355mm)
Face Plate
6” (152mm)
Headstock Taper MT-2
Tailstock Taper MT-2
Spindle Center to Floor (approx.) 44.29
” ~ 46.85” (1125 ~ 1190mm)
Power Supply 220V, 1ph, 60hz
Motor 2 hp (1.5kw), 220V, 1ph, 60hz, 5.3A
Inverter VFD-M-1.5kw Input Power 230V Only
Net Weight (approx.) 419 lbs. (190 kgs.)
Shipping Weight (approx.) 585 lbs. (265 kgs)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.