Baileigh Industrial WL-1218VS, Operator'S Manual, Page: 19 / 52

16
16
Safety Switch
This Lathe has a rocker style switch that will
accept a safety
padlock with 6.4mm (1/4”)
diameter shackle (not included).
To safeguard your machine from unauthorized
operation and accidental starting by young
children, the use of a padlock is required.
Store the key in a safe, inconspicuous place in
your workshop.
Motor Overload Protector
The lathe is equipped with a manual reset circuit breaker. If the tool is overloaded or stalled too
long the circuit breaker will trip causing the tool to shut off.
To restart:
1. Set the Safety switch to "OFF"
2. Allow the motor to cool 3-5 minutes.
3. Press the reset button (A).
4. Resume normal operations.
WARNING:
Always be sure
the switch is in the “OFF” position
before connecting the lathe to the power
source.
B
A