Baileigh Industrial WL-1218VS, Operator'S Manual, Page: 13 / 52

10
10
TECHNICAL SPECIFICATIONS
Swing Over Bed
12” (304.8mm)
Swing Over Tool Rest
9.4” (238.76mm)
Maximum Distance Between Centers 18
” (457mm)
Face Plate Diameter
3” (76.2mm)
Headstock Spindle
1”, 8TPI, RH thread
Headstock Spindle Taper MT2
Tailstock Spindle Taper MT2
Tailstock Spindle Travel 2-
1/4” (57.1mm)
Spindle Bore
0.433” (11mm)
Tool Rest 10
” (254mm)
Variable Speed Range Low 250-750rpm
Variable Speed Range Medium 600-1800rpm
Variable Speed Range High 1350-4000rpm
Power 110VAC / 60hz
Motor 0.75Hp (0.55Kw), 8 amp, 110V
Dimensions (L x W x H)
45.5” x 15.5” x 16” (1156 x 394 x 407mm)
Weight 106 lbs. (48kgs)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.