Baileigh Industrial RDB-150-AS, Operator'S Manual, Page: 12 / 60

9
9
TECHNICAL SPECIFICATIONS
Maximum Center Line Radius (CLR)*
8" (203mm)
Minimum Center Line Radius (CLR)* .5" (12.7mm)
Minimum OD .25" (6.35mm)
Mild Steel Pipe (Schedule 40) 2" (50.8mm)
Aluminum Pipe (Schedule 40) 2" (50.8mm)
Stainless Steel Pipe (Schedule 40) 1.5" (38.1mm)
Mild Steel Round Tube (Wall) 2.5" (.125) (63.5mm [3.175mm])
Aluminum Round Tube (Wall) 2.5" (.156) (63.5mm [3.96mm])
Stainless Steel Round Tube (Wall) 2.375" (.125) (60.325mm [3.175mm])
Chromolly Round Tube (Wall) 2" (.125) (50.8mm [3.175mm])
Mild Steel Solid Rod 1.25" (31.75mm)
Mild Steel Square Tube (Wall) 2" (.125) (50.8mm [3.175mm])
Power Supply 115VAC, 20A, 1ph, 60Hz
Motor 2hp (1.5kw) 115VAC, 18A, 1ph, 60Hz
Sound level <70db
Shipping Weight (Lbs.) 700lbs. (318kg)
Shipping Dimensions (L x W x H) 68 x 6
0” x 44” (1727 x 1524 x 1118mm)
Based on a material tensile strength of 64000 PSI
– mild steel
*CLR will vary based upon actual material and wall thickness.
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.