29
29
3. Press
to confirm or press
to clear.
SET LOW SPEED LIMIT
This function defines the speed level which is considered abnormal for the machine. When the
Controller starts the table movement up or down, and the table does not move, or moves with a
speed lower than defined, it stops the machine and displays:
Display
1. Press
to clear.
To set low speed limit:
2. Press
.
Display
..........................[default]
3. Enter the low speed level 0 to 99
0 = Machine test is disabled
1 = very low
:
:
99 = high
4. Press
to confirm or press
to clear.
Summary of Contents for IP-2509-HD-3
