25
25
3. Press the
key to complete.
The
LED lamp will be blinking indicating the controller is ready for positioning.
4. Press the
key to start the positioning or press the
key to cancel.
FAST PROGRAM (10 SETS)
To facilitate frequently used positions, such as matching dimensional lumber thicknesses, the
keys 0 to 9 have associated preset target values. By pressing one of these keys, its target value
is loaded automatically, and the positioning can be started immediately.
Entering Preset Target Values:
1. Press
.
2. Select a key 0 to 9 (total of 10 values).
3. Enter the target value.
4. Press
to confirm.
5. Follow the same procedure for entering the other preset target values.
6. Press
to exit.
Example:
To Enter Value in Program 0 = 10.00mm; and the Program 1 = 20.00mm
1. Press
.
Summary of Contents for IP-2509-HD-3
