Baileigh Industrial IP-2509-HD-3, Operator'S Manual

Page: 13 / 80

10
10
TECHNICAL SPECIFICATIONS
Cutting Capacity (W x H) 25" x 9" (635 x 229mm)
Table Size
25” x 32” (635 x 813mm)
Extension Wings Size
12.5” (317.5mm)
Table Size with Wings installed
25” x 57” (635 x 1448mm)
Dust Port
5” (127mm)
Maximum Depth of Cut @ 50% Width
1/4” (6.3mm) @ 10ft/min. (3m/min.)
Maximum Depth of Cut @ 100% Width
1/8” (3.1mm) @ 10ft/min. (3m/min.)
Minimum Material Thickness
1/2” (12.7mm)
Minimum Material Length 10
” (254mm)
Feed Rate Variable 10-30ft/min. (3-16m/min.)
Cutterhead Speed 5000 RPM
Number Of Knives 5 rows @ 29 = 145
Cutter Head Size 3-
3/8” (85.7mm)
Power Supply 220VAC, 3ph, 60hz
Main Motor 15Hp (11kw), 3Ph, 60Hz, 220VAC, 37A
Infeed Motor 1/2Hp (370w), 3Ph, 60Hz, 220VAC, 2A
Table Height Motor 3/4Hp (560w), 90VDC, 3A
Shipping Weight (Approx.) 1848 lbs. (839kg)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note : The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.