25
25
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface so it processes easily.
•
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
•
Chemical structure of material must be consistent.
•
Buy certificated steel from the same vendor when possible.
LUBRICATION AND MAINTENANCE
Note: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance
•
Check daily for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
•
Lubricate threaded components pivot points and sliding devices.
•
Check hydraulic hoses and fittings for leakage.
•
Keep area around machine clear of debris.
•
Clean the outside of the press with a clean, soft, and dry cloth.
•
When not in use, keep the press dry and covered. Keep the ram and piston fully retracted to
prevent rust or corrosion.
•
If press efficiency drops, purge air from the hydraulic system. See Purging the Hydraulic
System.
DO NOT
allow lubricant on the frame bed or the heel blocks. Wipe off immediately.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
