Baileigh Industrial DP-1500VS, Operator'S Manual

Page: 27 / 64

24
24
Manual Down-feed
The down-feed rate changes can only be made while the motor is
running and the selector switch (AE) is set to drilling mode.
1. Start machine by pressing start button (AG).
2. Set the down-
feed rate to “0” using handle (X).
3. Set to manual down-feed operation. Turn handle (AJ) clockwise (cw)
to lock the down-feed handles into manual mode.
4. Set the depth stop. Refer to Setting the Depth Stop.
5. Release the side ring scale depth stop by loosening handle (AK). This
depth stop must be free to allow the front depth stop to work properly.
6. Use the down-feed handles (E) to lower the spindle for operation.
Automatic Down-feed
Automatic down-feed is a feature to use only when drilling. The
down-feed rate changes can only be made while the motor is
running and the selector switch (AE) is set to drilling mode. Rate of
the automatic spindle down-feed is A: 0.2, B: 0.1, & C: 0.05.
1. Start machine by pressing start button (AG).
2. Set the down-feed rate. Use the handle (X) to change the rates.
Use the side ring depth stop to set the depth. Refer to Setting the
Depth Stop. *Only the ring scale will disengage the automatic
down-feed and return the drill to starting height.
3. Release the front side depth stop by loosening handle (S). This
depth stop must be free to allow ring scale depth stop to work
properly.
4. Release the down-feed lock handle (AJ) by turning
counterclockwise (ccw) about 7 times.
5. Change to auto down-feed mode by pulling the handle (E)
outward.
AE
AG
X
S AK
S
AJ
E
DIGITAL INDICATOR
RPM
0
l
245-2000
65-540
0
l
0