Baileigh Industrial DC-2100C Operator'S Manual Download

Page: 6 / 32

SAFETY INSTRUCTIONS

LEARN TO RECOGNIZE SAFETY INFORMATION

This is the safety alert symbol. When you see this symbol
on your machine or in this manual,

BE ALERT TO THE

POTENTIAL FOR PERSONAL INJURY!

Follow recommended precautions and safe operating practices.

UNDERSTAND SIGNAL WORDS

A signal word

–

DANGER

WARNING

CAUTION

– is used with the safety alert symbol.

NOTICE

, which is not related to personal injury, is used without a symbol.

DANGER

: Indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

: Indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

: Indicates a hazardous situation which, if not

avoided, could result in minor or moderate injury.

NOTICE

: Indicates a situation which, if not avoided, could

result in property damage.

IMPORTANT

PLEASE READ THIS OPERATORS MANUAL CAREFULLY

It contains important safety information, instructions, and necessary operating procedures.
The continual observance of these procedures will help increase your production and
extend the life of the equipment.

DANGER

WARNING

CAUTION

NOTICE

Summary of Contents for DC-2100C

































Search results

Summary of Contents for DC-2100C

Reviews:

Related manuals for DC-2100C

Brands by name

Popular brands

Baileigh Industrial DC-2100C, Operator'S Manual

Search results

Summary of Contents for DC-2100C

Reviews:

Related manuals for DC-2100C

Brands by name

Popular brands