Baileigh Industrial BS-350SA, Operator'S Manual

Page: 12 / 60

9
9
TECHNICAL SPECIFICATIONS
Capacity Rectangular 90° / 45°R / 45°L
13.5" x 8.5” (350 x 220mm) / 9.5” x 6.25” (240 x
160mm) / 7.25” x 4.25” (185.4 x 110mm)
Capacity Round 90° / 45° / 60°/ 45°L
10.5" (270mm) / 9.5" (240mm) / 6.25" (160mm) /
8” (210mm)
Capacity Square 90° / 45° / 60° / 45°L
10.25" (260mm) / 8.5" (220mm) / 6" (150mm) /
7.25” (180mm)
Miter Angle 0 - 60°R, 0 - 45°L
Return (Bow Raising) Hydraulic
Miter Adjustment Swivel Head
Blade Size (H x T x L)
1” x .035” x 124.5” (26 x .9 x 3160mm)
Blade Speed (fpm) 66
– 280fpm (20 – 85mpm) Variable
Blade Guide Carbide x Roller
Table Height
35” (889mm)
Drive Gear
Descent Control Hydraulic
Power Input 220V, 60Hz, 1-Phase
Blade Motor 2hp (1.5kw), 220V, 60hz, 3Ph, 6.2A, 1720rpm
Hydraulic Pump Motor .5hp (.37kw), 220V, 60hz, 1Ph, 4.5A, 1720rpm
Coolant Pump 1/16hp (40W), 220V, 60Hz, 1Ph, .42A
Shipping Weight 1080lbs (490kgs)
Shipping Dimensions (L x W x H) 73
” x 30” x 67” (1854 x 762 x 1702mm)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.