12
12
OPERATION AND MAINTENANCE
This machine is pre-adjusted before leaving the factory.
To use the Baileigh AP-5 press, rotate the handle (#
13
) to drive the blade-ram (#
6
) up or down
with gear (#
12
).
To balance the blade-ram (#
6
) to suit your particular application, adjust bolt (#
5
) and nut (#
6
)
accordingly.
Lubricate the press daily
PARTS DIAGRAM
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
When handling large heavy material make sure they are properly supported.
