14
14
ASSEMBLY AND SET UP
1. To assemble, first place the base plate
upside down and attach the four
casters to the holes provided and
tighten with the wrench. (See FIG. 1)
(FIG.1)
2. With the collector body & fan/motor
assembly in place, secure it to the base
plate using the screws provided. (See FIG.
2)
)
(FIG.2)
Two Person Lift. Use an assistant or lifting devise to fan and motor if needed.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
Summary of Contents for 1002685
Page 22: ...20 20 EXPLODED DIAGRAM...
