24V 50VA Motor control box -
Version 1.0
Instruction Manual
9/20
4
Cabling
w w w .b ai e r- g mb h .d e
4
Cabling
4.1
Cable diagram
4.2
Cable requirements
The following specifications are minimum requirements.
Cable
Cable type
Between motor and control device.
Motor supply (24V =)
up to 20 m
(60 ft):
2 x 0,50 mm² (20 AWG)
20 to 50 m
(60..160 ft):
2 x 0,75 mm² (18 AWG)
Encoder
up to 50 m
(160 ft):
4 x 0,25 mm² (22 AWG)
Between switch/actuator and control
device.
Open, Close
up to 50 m
(160 ft):
3 x 0,25 mm² (22 AWG)
Stop (optional)
up to 50 m
(160 ft):
2 x 0,25 mm² (22 AWG)
Appliance, configurable IOs
Dependent on requirements
up to 50 m
(160 ft):
Table 1 – Cable requirements
Switch /
Actuator
Motor
2
24V =
3
Power supply
3
Power line
230V~ 50 Hz
Motor control
device
Motor control box
b
Encoder
optional
4
Ground, Open, Close
2
Ground, Stop
Switch /
Actuator (opt.)
2
Ground, 24V DC
Appliance
(optional)
?
Dependent on requirements
Configurable
and switchable
IO (optional)
