18/20
Instruction Manual
24V 50VA Motor control box
- Version 1.0
w w w .b ai e r- g mb h .d e
6
Initial operation
6.3
Behavior after a power cut
When the main power is cut off, the control device will not work. After main power is
restored, the control device can return to normal operation without an initial
operation (Supposed that an initial operation already took place before)
Restore main power.
Control device after power cut:
Red LED blinks continuously twice with a short break of 1.5 sec.
Execute desired action:
Press OPEN to open the door, press CLOSE to close the door.
First movement will start with reduced speed.
Let the door run into the end position.
Motor shuts down and red LED stops blinking.
Normal operation is restored.
Hint
After a power cut, no further initial operation is necessary.
The operation parameters are saved permanently during
initial operation.
Bring control device
back into normal
operation
…
