36
Figure 61: Port Forwarding settings
Table 7: Port Forwarding
Field Name
Description
WAN Port Range
Enter the port number range for the remote device in the format of 1000 to 1500
LAN IP Address
Enter the local host IP address. The address must be different from the IP address that is set
for the LAN Host Settings parameter, but they must be on the same network segment.
LAN Port
Enter the local port number. Range is 1 to 65,535.
Protocol
Select the type of data protocol, either TCP, UDP, or TCP&UDP
Remarks
3.8.2. Port Triggering
Port Triggering is a configuration option on a router - in this case, the CPE - if it is operating in NAT mode as
the WAN interface type (
). When an application uses a trigger port to build a connection, the
CPE will forward the data to the forward port.
To configure the feature, click on the check box next to
Enable
and then click on
ADD LIST
to enter the
service type, protocol, trigger port, and forward port (Figure 60).
Figure 62: Port Triggering Settings
