manualshive.com logo in svg

Baha Auto-Lock Arm Awning, Installing, Page: 1 / 4

Share
Download
Baha Auto-Lock Arm Awning Installing Download Page 1

 
 

 
 

 
 
 

 

Installing Auto-Lock Arm Awning 

 
Item Checklist 

-

 

Venetian Blind 

-

 

Brackets & Screws 

 

Tools Required 

-

 

Cordless Drill (with Hammer 

capability if masonry wall) 

-

 

#2 Phillips Head drill bit.  

-

 

Metal Tape Measure 

-

 

Pencil 

 

Fixing Type 

 
Fibro 

Timber 

Concrete, Brick or Stone 

-

 

Use the provided 

screws 

 

-

 

Use the provided 

screws  

 

-

 

Use the provided 

screws  

-

 

50mm Green Wall 

Plugs 

-

 

6.5mm Masonry 

Drill Bit 

-

 

Hammer 

(These items need to be 

purchased separately)  

 

 

 

Summary of Contents for Auto-Lock Arm Awning

Page 1: ... with Hammer capability if masonry wall 2 Phillips Head drill bit Metal Tape Measure Pencil Fixing Type Fibro Timber Concrete Brick or Stone Use the provided screws Use the provided screws Use the provided screws 50mm Green Wall Plugs 6 5mm Masonry Drill Bit Hammer These items need to be purchased separately ...

Page 2: ...s will allow you to then mark the opposite hood tab holes Ensure that your hood is level by using a spirit level prior to marking out Take the hood down Take your template and mark the remaining screw holes including your side arms Pre drill your holes ensuring that the holes are deep enough and insert wall plugs provided Insert your top hood screw and hang your hood Now insert each of your four h...

Page 3: ...To mount your Awning insert the pin end first and drop the flat end from the top of the bracket Take your base rail arms and attach them to the base rail of your awning The screws will already be within the base rail Ensure that the arms are facing up Then simply slide the base rail arms up the side arms ...

Page 4: ...further information please contact our customer service team Monday to Friday 9am to 5pm Phone 1800 039 171 or Email sales baha com au Now pull the blind down along the rails and ensure side rails are vertical Place the U Brackets approx 100mm from the bottom of the side rails and screw into place on both sides you can raise the blind again once you have positioning for the U Brackets ...

Reviews:

No comments