UniMod LTE
19
8.2
Cyclic Reset
Optionally the time-controlled modem-reset can be activated. With this
turned on the modem (Telit-Module) is regularly deactivated by the internal
firmware. After the reset it logs on to the radio network again. Activating is
recommended when the field strength of the used radio network is very low.
This functionality can be enabled using the UniModSet program.
8.3
Password Protection
It is also possible to activate the password for remote programming (Re-
mote Control). Default password is
modem1
. Please note that passwords
are case-sensitive.
8.4
SIM-Card
The internal CPU can optionally send the SIM PIN to the modem. This is
useful when using a SIM-Card which demands the PIN to be entered after
power failure. The operator must ensure that the correct PIN number of the
SIM-Card is entered. If the PIN number is incorrect, the SIM-Card is
blocked after three PIN entries. Unlocking is then only possible with the su-
per PIN in an external device (e.g. mobile phone / mobile phone).
