Badmobil SUSI, Manual

Page: 21 / 34

2 3
The surface of all our products is among the highest quality sur-
faces available, made of Mineral Composite. With normal use, the
surface will retain its beauty with only a minimal amount of care.
ABOUT THE MINERAL COMPOSITE
Every Mineral Composite product has a minimum dolomite
content of 75%. It’s external surface is covered with nanocoat.
The material fully utilises the properties of dolomite stone, while
being reinforced with a flexible resin binder to ensure resistance
under load, damage from impact and the effects of high and low
temperatures.
Products made from Mineral Composite maintain an optimal
temperature for a long time. They are always warm to the touch
and provide unprecedented comfort in the bathroom.
Due to the inherent strength of the nanocoat surface products
are always pleasant to the touch and have a smooth finish. Min-
eral Composite’s insusceptibility to bacterial growth, absorption
of water and chemical substances, ensure a long lasting quality
and ease of care.
For standard cleaning, glossy and matt finishes, we recommend
using widely available non-abrasive cleaning products. The matt
finish may occasionally require a mildly abrasive product.
NOTE:
TO MAINTAIN THE BEAUTY OF THE PRODUCT
SURFACE AND AVOID UNWANTED STAINS (HAIR DYE,
INK, LIPSTICK AND OTHER COLOURING MATTER) WE
STRONGLY RECCOMEND THE IMMEDIATE REMOVAL
OF DIRT.
THE TEMPERATURE OF THE WATER SHOULD NEVER
EXCEED 70°C FOR A WASHBASIN AND 75°C FOR A BATH
OR AND SHOWER TRAY.
AVOID ANY BATH CLEANING PRODUCTS THAT
CONTAIN NATURAL OR ARTIFICIAL DYES, TEST
PRODUCT ON AN INCONSPICUOUS AREA BEFORE
USING.
IMPROPER USE MAY DAMAGE PRODUCTS AND
INVALIDATE THE WARRANTY.
RECOMMENDATION FOR GLOSS FINISHES
1. For regular cleaning use of universal cleaning agents with non-
abrasive properties, or any mild dish soap and water or product
specifically made for gloss surfaces.
2.
After each use the inner surface must be rinsed with water and
cleaned with a cotton cloth.
3.
In order to maintain the product aesthetics we recommend
using natural polishing wax, for example, based on beeswax,
once per month.
4.
Stronger dirt (grease, mildew, oil, paint or ink stains) must be
treated with warm water and gentle cleaning agents or a soap
solution with water.
5. Never use any abrasive cleaners. If any product feels gritty
when rubbed between your fingers then it is not safe to use on
your gloss product.
6. Small scratches can be removed by using a polishing paste.
7. Scratches on the surface may be treated with abrasive paper
soaked in water. First try a 1500 grit paper, then if needed try
a 3000 grit paper. Afterwards, the surface may be polished
with a fine grained polishing paste (for painted surface).
8.
Limescale may be treated with a solution of water and vinegar.
RECOMMENDATION FOR MATT FINISH
1. For regular cleaning use a universal cleaning agent with nona-
brasive properties, or any mild dish soap and water.
2. After each use the inner surface must be rinsed with water and
cleaned with a cotton cloth.
3. For more stubborn stains (grease, mildew, oil, paint or ink
stains), use a mild abrasive cleaner. It may take a little more
scrubbing to actually remove marks.
NOTE: PLEASE BE CAREFUL WITH ALL PRODUCTS
CONTAINING ABRASIVES.
4. In order to maintain the aesthetics of a product it is recom-
mended to use skin care oil once per month.
5. Stronger dirt must be treated with warm water, with gentle
cleaning agents or a soap solution with water.
6. Scratches on the surface may be treated with a rough sponge
and then maintained with oil. Limescale may be treated with
a solution of water and vinegar.
SCRATCHED OR DAMAGED SURFACES
To repair scratched or damaged surfaces please see point 7 or
use our dedicated REPAIR KIT.
CARE & CLEANING GUIDELINES
EN EN