Dear customer,
Thank you for choosing our bathroom furniture. If handled properly, you will be able to enjoy this product for a long time.
Please note that the product must be checked for any transport damage before assembly. In particular, the electrical cables and components must be checked! In the event
of a complaint, please retain the packaging. No liability is assumed for damage to products which have already been assembled, products assembled by staff who are not
experts in the field and damage caused by improper handling!
1. Our furniture is suitable for use in private households, which includes the bathroom area in enclosed living spaces. Our furniture is not suitable for commercial use.
2. Keep packaging materials and small parts, such as batteries, out of the reach of children.
3. Only clean furniture and mirrors with water and a clean, damp cloth.
4. Please note the manufacturer’s instructions regarding microfibre cloths. Unsuitable microfibre cloths may cause serious damage to the facades and mirror surfaces.
5. Do not use any cleaning products (glass cleaners) which contain alcohol, abrasives, chemicals or strong detergents.
6. Always wipe the furniture to dry it in order to prevent any damage to the material (moisture expansion) or the mirror coating (spots) resulting from standing water.
7. Do not use steam cleaners. This leads to moisture expansion and causes serious damage to the furniture.
8. Seal all connection areas of the covering plates to other cabinets and wall areas, as well as to the wash basin, with silicone or other suitable sealants.
9. Protect your furniture in the bath/shower area using a shower screen. Damage caused by excess moisture is excluded from the warranty. Protect furniture with electrical
installations against water splashes!
10. The bathroom furniture is suitable for a normal bathroom environment. Temporary air humidity of 90% is included (no sauna use). Ensure that there is sufficient ventilation
and drying in the bathroom, in particular after showering or bathing.
11. Hooks and dowels provided with the product are only suitable for MZ20 solid brick walls, HLZ 20 hollow bricks or B25 concrete.
Assembly, care and safety instructions:
1. Caution! Risk of electric shock: Touching live parts may cause severe injury or even death. Connection, decommissioning and repair processes may only be carried out
by a qualified electrician in compliance with VDE 0100-701, IEC 60364-7-701! Always use the connection accessories which are provided.
2. Should there be no ground fault circuit interrupter on site, we recommend using a circuit breaker with 30 mA to increase the level of personal safety. The rated fault current
is to be provided for in accordance with EN 61008.
3. The product may not be operated without supervision. Parents must supervise their children during operation.
4. In the event of storms or longer periods of disuse, disconnect the transformer box/operating unit from the power supply. This enables damage caused by lightning or
voltage surges to be prevented.
5. A defective transformer box must be decommissioned; it may not be repaired and must be replaced with a new one. A damaged external cable may only be replaced by
a professional.
6. When changing light sources, it must be ensured that the data for the max. lamp wattage (W) and voltage (V) corresponds to the data for the transformer/light.
7. Avoid longer periods of direct eye contact with the LED light source as this may damage the eyes.
8. Batteries must not be dismantled, short-circuited or thrown into fire. Never try to recharge non-rechargeable batteries. This is associated with a risk of explosion! Remove
the batteries when you are not using the device for an extended period of time in order to prevent damage caused by leakage. Batteries which have leaked or been damaged
may cause acid burns in the event of contact with the skin. Protective gloves must therefore be used when handling damaged batteries.
Electrified furniture
Proper use and daily use
Caution! High risk of breakage: In the event that you ship this product, please package the item in exactly the same way as it was packaged when you received it. Use
the original packaging with filling and padding material. If you do not use the original packaging properly, we will have to charge you for any transport damage which is
incurred!
5MAN000000 S4/20 05/22
GB
Light sources replaceable / non-replaceable
Separate operating unit replaceable / non-replaceable
Separate operating unit replaceable by a professional / non-replaceable
LED
230V
LED
230V
LED
230V
LED
230V
LED
LED
Disconnect the power supply before changing the bulb. In the event
of a fixed installation, the supply circuit must be fitted with an isolating
unit (e.g. circuit breaker).
Double insulated, protection class I, devices with earth wire
connection (yellow/green).
M
M
Suitable for installation in furniture, but not with surfaces with normal
flammability levels.
Double insulated, protection class II, devices without earth
wire connection.
Protective insulation, protection class III, device without protective
conductor connection,
protective extra-low voltage
≤
50V AC
≤
120V DC
III
No electrical cables, supply cables or waste pipelines may be located
in the fixing area.
?
!
Removal of light sources / separate operating unit
https://www.fackelmann.com/downloads/Oekodesign_Anforderungen_01_2021.pdf
IP protection type:
Figure 1 refers to protection against contact and ingress of solid foreign
bodies.
Figure 2 specifies protection against moisture.
IPxx
Summary of Contents for SUSI
