Badger Meter scan micro station, Manual

Page: 6 / 36

2 Safety Guidelines
Installation, electrical connection, initial startup, operation and maintenance of any s::can pro-
duct as well as complete s::can measuring systems must only be performed by qualified per -
sonnel. This qualified personnel has to be trained and authorised by the plant operator or by
s::can for these activities. The qualified personnel must have read and understood this manual
and have to follow the instructions contained in this manual.
For proper initial startup of complete s::can measuring systems, the manuals for the controller and software used
for operation (e.g. con::lyte, con::cube, con::nect, moni::tool), the connected probes and sensors as well as the
used additional devices (e.g. compressor) have to be consulted.
!
The operator has to obtain the local operating permits and has to comply with the joint constraints associ -
ated with these. Additionally, the local legal requirements have to be observed (e.g. regarding safety of
personnel and means of labour, disposal of products and materials, cleaning, environmental constraints).
Before putting the measuring device into operation, the operator has to ensure that during mounting and initial
startup - in case they are executed by the operator himself - the local legislation and requirements (e.g. regarding
electrical connection) are observed.
!
All s::can products are leaving our factory in immaculate technical and safety conditions. Inappropriate or
not intended use of the product, however, can cause danger! The manufacturer is not responsible for da -
mage caused by incorrect or unauthorised use. Any kind of manipulation of the instrument is strictly prohi -
bited - except for the activities described in this document.Conversions and changes to the device must not be
made, otherwise all certifications and guarantee / warranty become invalid. For details regarding guarantee and
warranty please refer to our general conditions of business.
2.1 Declaration of Conformity
This s::can product has been developed, tested and manufactured for electromagnetic compatibility (EMC) and
according to applicable European standards, as defined in the declaration of conformity.
2.2 Special Hazard Warning
!
Because the s::can measuring systems are frequently installed in industrial and communal waste water
applications, one has to take care during mounting and demounting of the system, as parts of the device
can be contaminated with dangerous chemicals or pathogenic germs. All necessary precautions should be
taken to prevent endangering of one’s health during work with the measuring device.
micro::station / nano::station, 03-2023 Release Copyright © s::can GmbH
www.s-can.at 6 / 36