Badger Meter scan micro station, Manual

Page: 31 / 36

9.5 Inlet Strainer
To protect the station from heavy contamination, each clean water station is equip -
ped with an inlet strainer. If necessary, the filter sieve must be cleaned.
Name Specification Remark
Part-no. F-45-STRAIN
Filter 80 mesh = 0.2 mm
Dimensions 75 / 25 mm
17 mm
Length / Height
Diameter
Material Nylon (white and trans -
parent)
Operating Temperature max. 50 °C (125 °F)
Operating Pressure max. 10.34 bar (150 psi)
max. 6.9 bar (100 psi)
at 21 °C (70 °F)
at 52 °C (125 °F)
Process connection
1
/
4
“ NPT external thread
9.6 Flow Restrictor
To limit the discharge to max. 1 l/min and at the same time protect the sensors from
excessive pressure, a flow restrictor is installed in the station after the optical mea -
surement (spectrometer probe or i::scan).
Name Specification Remark
Part-no. F-45-FLOW-1
F-45-FLOW-MICRO
F-45-FLOW-NANO
Version until end 2022
(Figure at the top)
for micro::station
(Figure centre)
for nano::station
(Figure at the bottom)
Dimensions 50 / 31 mm
1.98 / 1.23 inch
L / D only F-45-FLOW-1
without fittings
Material Polypropylene white
Operating Temperature max. 60 °C
(max. 140 °F)
Operating Pressure max. 8.6 bar (125 psi)
min. 1.0 bar (14.5 psi) Reaching the measured
flow rate
Discharge 0.26 to 15 l/min
0.07 to 3.96 GPM
Process connection
1
/
4
“ NPT internal thread
micro::station / nano::station, 03-2023 Release
www.s-can.at
Copyright © s::can GmbH
31 / 36