Barcode scanner
November 2016
LMS_FMS Compact_BA_02_0163
Page 13
8.
BARCODE SCANNER
The serial port of the FMS Compact can be connected to a barcode scanner. It will work parallel to the existing keypad. You
always have the choice to use the keypad or the scanner.
Note:
If the barcode is activated, the PC software or external printer port cannot be used anymore.
Connection:
RS232, D-Sub 25-pole, 9600 Baud, 8 DataBit, ParityNone, 1 Stop Bit
Recommended barcode scanner
: Datalogic Gryphon, Datalogic Magellan 1000i
Barcode sample
PIN number
1111 [CR] [LF]
Job number
123456789012 [CR] [LF]
Hose selection
1 [CR] [LF]
Quantity
1.5 [CR] [LF]
Dispense start
*Start* [CR] [LF]
End suffix:
Each transmission from the barcode scanner must be followed by a CR and LF control signal.
CR
=
ASCII (13)
=
Hex (0x0a)
LF
=
ASCII (10)
=
Hex (0x0d)
Barcode scanner only available in firmware v5.0 or later.
Quit
*STOP* [CR] [LF]
Enter
[0x14] [CR] [LF]
Summary of Contents for Oval Gear FMS Compact
Page 20: ...www badgermeter de...
