General system reset
November 2016
LMS_FMS Compact_BA_02_0163
Page 11
Ticket Count
The amount of tickets you would like to print.
Additive
This menu is only needed for Special Mode 2
See chapter 9.2.
ppm = Parts per Million
Dispense TO
Defines the maximum dispense time in seconds (10-600).
999 s will disable this function.
If the dispense time is exceeded, the following message will be displayed:
Dispense Alert
Dispense time exceeded
Printout will be started; X will indicate the Hose No.:
Dispense time exceeded: X
Only firmware v5.10 and later
6.
GENERAL SYSTEM RESET
This function will reset and erase the FMS Compact (only firmware v3.9 and later)
NOTE:
System will be set to factory default data.
Procedure:
Unplug the FMS Compact and press the button 1 and 2.
Keep the buttons pressed and plug in the power supply.
Quit <= => OK
Dispense Alert
-----------------
Timeout: 120
-----------------
in seconds
from 10 - 600
Quit <= => OK
Product:
Product 1
1
Factor:
100000 (ppm)
Quit <= => OK
Select Product:
Product 1 1
Product 2 2
Product 3 3
Product 4 4
Quit <= => OK
Print Ticket
-----------------
Quantity: 1
(1 … 3)
Quit <= => OK
!!! CAUTION !!!
This procedure
will erase and
reset the device.
Quit <= => OK
ARE YOU SURE ?
Quit: Cancel
OK: Proceed
Quit <= => OK
ARE YOU SURE ?
Quit: Cancel
OK: Proceed
xxxx of 2126
Summary of Contents for Oval Gear FMS Compact
Page 20: ...www badgermeter de...
