Display and keypad
Page 11 / 23
MID_VD_BA_02_1607
4. Display and keypad
Display:
The display is a backlit LCD and displays the current date and time, percent of battery
charge and menu indications.
Keypad:
The keypad consists of 9 function keys, 12 numeric keys and the On/Off key.
Power key:
The power key on the lower right applies or remove power to the Verification Device.
Function keys:
The 2 top “soft” keys on the left and right sides of the up arrow key provide menu access,
wet or dry detector selection.
The up, down, left and right keys allow menu navigation.
The “OK” key confirms a menu selection.
The left arrow is the “Back key” (you can return back to the previous menu) and the “Delete
key”.
Alphanumeric keys:
The primary purpose of these keys is for entering the serial number of a meter if not
automatically recognized by the internal firmware or external software. Other functions
include Test ID entry.
D-25 harness connector
Display
Function keys
Numeric keys
Power key
AC Power connector
USB
connector
