Programming
Digital I/O
The
Digital I/O
channel can be used for remote control of some functions of the
FC-5000 flow computer�
All six of the channels are input-only and can be configured for any combination
of the following�
Function
Description
Inactive
No Function�
Reset Relay 1
Resets latch on Relay 1�
Reset Relay 2
Resets latch on Relay 2�
Reset Total Ch 1
Resets
Total CH1.
Reset Relay 1 / Total Ch 1
Resets latch on Relay 1 and resets
Total CH1.
Reset Relay 2 / Total Ch 1
Resets latch on Relay 2 and resets
Total CH1.
1� Navigate to
SYSTEM SETUP > ADVANCED SETUP > DIGITAL I/O
�
2� Highlight one of the six input channels and press
ENTEO
�
Each time you press
ENTEO
, the channel toggles through the
available configurations�
3� Press
ENTEO
repeatedly until the configuration you want appears�
4� Press
BACKSPACE
to return to the previous menu�
To disable any channel, simply toggle the digital I/O channel to
INACTIVE
�
Page 35
July 2016
CTL-UM-01723-EN-01
