Scope of this manual
Page 3
SGN-UM-00282-EN-05
June 2021
SCOPE OF THIS MANUAL
This manual is intended to help you get the B220-885 K-factor scaler and the
B220-900 Programming Software up and running quickly
IMPORTANT
Read this manual carefully before attempting any installation or operation. Keep the
manual accessible for future reference.
UNPACKING AND INSPECTION
Upon opening the shipping container, visually inspect the product and applicable
accessories for any physical damage such as scratches, loose or broken parts, or
any other sign of damage that may have occurred during shipment
OTE:
N
If damage is found, request an inspection by the carrier’s agent within 48
hours of delivery and file a claim with the carrier A claim for equipment
damage in transit is the sole responsibility of the purchaser
SAFETY
Terminology and Symbols
Indicates a hazardous situation, which, if not avoided,
will
result in death or serious personal injury
WARNING
Indicates a hazardous situation, which, if not avoided,
could
result in severe personal injury or death
Indicates a hazardous situation, which, if not avoided,
could
result in minor or moderate personal injury or damage
to property
Considerations
The installation of the B220-885 K-factor scaler and the B220-900 Programming
Software must comply with all applicable federal, state, and local rules,
regulations, and codes
IF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY THE MANUFACTURER,
THE PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED.
AVERTISSMENT
DANS LE CAS D'UNE UTILISATION NON PRÉVUE PAR LE FABRICANT, LA PROTECTION
FOURNIE PAR L'ÉQUIPEMENT PEUT ÊTRE RÉDUITE.
FOR FIELD WIRING CONNECTIONS, WIRE MUST BE RATED AT 158° F (70° C) OR HIGHER.
AVERTISSMENT
POUR DES CÂBLAGES SUR LE TERRAIN, LES CÂBLES DOIVENT ÊTRE ÉVALUÉS À 70° C
(158° F) MINIMUM.
